NovoFold
High-speed folding door with a long service life
The NovoFold is a high-speed folding door for external openings up to 36 m², built to last for years with minimal maintenance. Strong belts pull the reinforced curtain sections up into a compact package above the opening. Even in heavy wind (up to class 5), the door stays stable.
- Max. area
- 36 m²
- Wind resistant
- up to 13 Bft
- Opening speed
- up to 1.1 m/s
- Colours
- 9 standard
Robust and low-maintenance
All NovoFold components are heavy-duty: powder-coated steel side frames, a steel shaft and an aluminium bottom beam with flexible seal and opto sensors. The door works without balancing springs, so without the wear and maintenance that come with them.
As standard the door achieves at least wind class 3; up to class 5 (13 Bft) is available on request. That makes the NovoFold ideal for logistics halls where forklifts and large goods go in and out every day.
Safe and quickly replaced
A safety photocell at 250 mm height and opto sensors in the bottom beam are standard; a light curtain or radar is available as extra protection. With the optional EasyReplace side frames, the complete curtain can be swapped quickly in case of damage.
Available in the following colours
Specifications NovoFold
Dimensions
- Max. width
- 6,000 mm (up to 7,000 mm on request)
- Max. height
- 6,000 mm (up to 6,800 mm on request)
- Max. area
- 36 m²
- Headroom
- 1,070 mm
- Side room drive side
- 520 mm
- Side room non-drive side
- 220 mm
Performance
- Opening speed
- 0.9 m/s standard, 1.1 m/s with frequency control (up to 5 × 5 m)
- Closing speed
- 0.9 m/s standard, 0.5 m/s with frequency control
- Wind load
- At least class 3 (EN 12424); up to class 5 / 13 Bft on request
Curtain & construction
- Door curtain
- 900 g/m² polyester-reinforced PVC, class M2, with reinforcement profiles
- Curtain colours
- White 9016, yellow 1003, orange 2004, red 3002, blue 5005/5002, green 6026, grey 7038, black 9005
- Windows
- 1,080 × 360 mm transparent at eye level, max. 2 rows
- Side frames
- Sendzimir galvanised steel, powder-coated RAL 7011
- Bottom edge
- Aluminium HardEdge with flexible seal and opto sensors
- Drive
- Plug-on motor at the side or front, left or right
Drive & control
- Operation
- Open-Stop-Close, hold-to-run also possible
- Control units
- GFA TS971 or TS981
- Connectable
- Push button, pull switch, key switch, photocell, radar, induction loop, (multi-channel) remote control
- Supply voltage
- 3N~400 V/16 A, or 230 V with frequency controller
- Power
- max. 4 kW
- Motor protection class
- IP65
Safety
- Photocell
- Standard, at 250 mm from the floor
- Opto sensors
- Standard in the bottom beam
- Safety marking
- Standard
- Power failure
- Can be opened manually
- Standard
- EN 13241
All values are indicative and depend on the configuration. Subject to technical changes.
