ALU 40 mm
Light and visibility in your hall, without compromising on strength. The ALU 40 consists of a frame of anodised aluminium profiles that we fill as you wish with glass, multi-wall sheet, perforated aluminium or solid sandwich panels. The result is a representative door that's perfect for showrooms, workshops and garages.
- Profile thickness
- 40 mm
- Max. size
- 8,000 × 6,000 mm
- Wind resistance
- Class 3–4
- Door U-value
- 3.87 W/m²K
One frame, endless infills
Because the sections are an aluminium framework, you decide what the door looks like. Combine clear or tinted glazing with polycarbonate multi-wall sheets (five chambers, five colours), air-permeable perforated panels or solid panels in a RAL colour. ISO and ALU sections can also be combined in one door.
Profiles and glazing beads are clear anodised as standard and can be coated in colour on request. With optional reinforcement profiles, the door withstands high wind loads.
Also with a wicket door
Like the ISO 40, the ALU 40 is available with an integrated wicket door or a side door next to it. Handy when people come and go often and the large door can stay closed.
Specifications ALU 40 mm
Dimensions
- Profile thickness
- 40 mm
- Max. width
- 8,000 mm
- Max. height
- 6,000 mm
- Max. area
- 48 m²
Performance
- U-value (5 × 5 m)
- 3.87 W/m²K
- Wind resistance
- Class 3–4 (EN 12424), up to 12–13 Beaufort
Materials & infills
- Frame
- Clear anodised aluminium profiles and glazing beads
- Frame colour
- Anodised, colour coating optional
- Infills
- Glass and plastic in various grades, 5-chamber polycarbonate multi-wall sheet (5 colours), perforated aluminium (2 types), double-walled sandwich infill
- Centre hinges
- Galvanised
Construction
- Tracks
- Sendzimir galvanised steel
- Rollers
- Nylon tread, 11 mm axle
- Steel cables
- Six-fold safety factor
- Hardware
- Galvanised
- Sealing
- EPDM all round and between sections
- Lift types
- Standard, high, vertical, roof-pitch or low headroom
Drive & control
- Operation
- Manual (pull rope or chain hoist) or electric
- Control
- Hold-to-run, impulse or remote control
- Control units
- TS971, TS981 or T100R (frequency-controlled)
- Motor supply voltage
- 230 V or 400 V, 50/60 Hz
- Motor protection class
- IP54
- Connectable
- Push button, pull switch, key switch, photocell, radar, induction loop, hand transmitter
- Smart control
- Force monitoring, cycle counter and fault memory (last 6 messages)
Safety
- Spring break protection
- Standard
- Slack cable protection
- Standard
- Emergency operation
- Hand chain down to operating height
- Standard
- EN 13241
All values are indicative and depend on the configuration. Subject to technical changes.
